Description
Varis Style Carbon Fibre Bonnet 2 – Best Mitsubishi Lancer EVO X Bonnet Upgrade Australia
Get the best Varis Style Carbon Fibre Bonnet 2 for Mitsubishi Lancer & EVO X. Genuine carbon, dual vent design, OEM fitment, AU-wide shipping. Bodykitbae!
Varis Style Carbon Fibre Bonnet 2 – Best Mitsubishi Lancer EVO X Bonnet Upgrade Australia
Varis Style Carbon Fibre Bonnet 2 Mitsubishi Lancer EVO X is the most refined and most purposeful dual-vent Varis-inspired carbon fibre bonnet upgrade available for Mitsubishi Lancer, Lancer Ralliart, and EVO X owners across Australia.
The Style 2 design represents the next evolution from the single-vent Varis Style 1 — introducing dual sculpted vent openings that dramatically increase engine bay heat extraction capacity while adding a second layer of visual complexity and aerodynamic aggression to the bonnet surface.
In genuine carbon fibre, the Varis Style Carbon Fibre Bonnet 2 delivers the weight reduction, thermal insulation, and premium woven carbon aesthetics that make carbon fibre the definitive material choice for serious Mitsubishi performance and show builds across Sydney, Melbourne, Brisbane, Perth, and Adelaide.
At Bodykitbae in Blacktown, Sydney NSW, we supply the best aftermarket carbon fibre bonnets, Varis-style body kit components, and aerodynamic upgrades to Mitsubishi enthusiasts Australia-wide. If you are searching for the best Varis Style Carbon Fibre Bonnet 2 for your Mitsubishi Lancer or EVO X in Australia, you have found it.
Product Overview
The Varis Style Carbon Fibre Bonnet 2 Mitsubishi Lancer EVO X is a complete genuine carbon fibre bonnet replacement — a full bonnet panel in genuine woven carbon fibre that replaces the factory steel bonnet using the factory hinge points and bonnet latch for a direct OEM bolt-on installation.
The Style 2 designation identifies this as the second-generation Varis bonnet design in the range — featuring dual sculpted vent openings that build directly on the clean single-vent foundation of the Style 1, adding a second vent that increases thermal extraction capacity and visual complexity in equal measure.
The dual-vent design of the Varis Style Carbon Fibre Bonnet 2 sits at a distinctive point in the Varis bonnet range.
It is more aggressive than the single-vent Style 1 — the dual vents immediately communicate a more committed performance intent to every observer who sees the front of your Lancer, Ralliart, or EVO X.
But it retains a degree of visual restraint that the more complex multi-vent Style 8 does not — the dual-vent design is the choice for builds that want clear, purposeful Varis visual identity without the full maximum-aggression commitment of the Style 8.
It is the Goldilocks position in the Varis bonnet range — more presence than Style 1, more restraint than Style 8, and genuine performance character in every light and from every angle.
Whether you are building a refined show Lancer in Sydney, a performance EVO X in Melbourne, a balanced track and street build in Brisbane, or a clean aggressive Ralliart in Perth — the Varis Style Carbon Fibre Bonnet 2 is the bonnet that delivers exactly the right level of presence.
For Varis bonnet design reference and Mitsubishi EVO X build guides, visit Mitsubishi Australia and MLOC Australia. For Varis Style 2 community build galleries, visit NASIOC and FT86Club.
Why the Varis Style Carbon Fibre Bonnet 2 is the Best Bonnet Upgrade
The Varis carbon fibre bonnet range for the Mitsubishi Lancer and EVO X platform spans multiple design variants — each delivering a distinct combination of visual aggression and thermal performance.
The Varis Style Carbon Fibre Bonnet 2 Mitsubishi Lancer EVO X occupies the position that the most discerning Mitsubishi enthusiasts across Sydney, Melbourne, Brisbane, and Perth consistently identify as the sweet spot — enough aggression to make a clear statement, enough restraint to work in every environment.
Unlike the single-vent Style 1 which suits the most OEM+ and street-focused builds, the dual-vent Style 2 communicates clear performance intent from the first glance.
Unlike the multi-vent Style 8 which demands a full track or show car commitment, the dual-vent Style 2 works on daily drivers, weekend warriors, street builds, and show cars with equal effectiveness.
It is the most versatile Varis bonnet variant in the range — and in genuine carbon fibre, it is the most impressive version of that versatility.
For Varis aero design philosophy and Mitsubishi carbon bonnet engineering reference, visit Motor Trend’s Mitsubishi coverage and Car and Driver.
Varis Bonnet Range Comparison – Where Style 2 Sits
Understanding the full Varis bonnet range helps identify exactly why the Varis Style Carbon Fibre Bonnet 2 is the right choice for so many Mitsubishi builds across Australia.
| Bonnet Variant | Vent Config | Visual Character | Thermal Performance | Best For |
|---|---|---|---|---|
| FA Style | Single central | Clean, OEM+ | Good | Street, OEM+ |
| Varis Style 1 | Single sculpted | Purposeful | Good | Street, mild builds |
| Varis Style 2 ✅ | Dual sculpted | Aggressive yet refined | ✅ Better — dual extraction | Street, show, track |
| Varis Style 8 | Multi-vent complex | Maximum aggression | Maximum | Time attack, show |
The Varis Style Carbon Fibre Bonnet 2 occupies the ideal middle ground — it is the most popular single variant in the Varis bonnet range for Mitsubishi Lancer and EVO X builds across Sydney, Melbourne, Brisbane, and Perth.
Key Features of the Varis Style Carbon Fibre Bonnet 2
Varis Style Carbon Fibre Bonnet 2 – Construction & Finish
- Material: Genuine woven carbon fibre with UV-resistant high-gloss clear coat
- Core: Carbon fibre outer skin with inner structural layer for panel rigidity
- Finish: Exposed gloss carbon weave — deep, rich texture across the entire bonnet surface
- Weight: Up to 50% lighter than factory steel bonnet
- Vent Configuration: Dual sculpted vent design — two precisely positioned vent openings
- UV Resistance: Multi-layer UV clear coat — engineered for sustained Australian sun in Sydney, Brisbane, and Perth
- Durability: High-strength carbon fibre — heat-resistant, vibration-resistant, UV-stabilised
Varis Style Carbon Fibre Bonnet 2 – Design Specifications
- Profile: Varis Style 2 — dual sculpted vent design — refined aggression at the perfect balance point
- Vent Count: Two precisely positioned sculpted vent openings
- Vent Function: Dual vents extract hot air from the engine bay — improved thermal performance over single-vent designs
- Body Lines: Sculpted panel lines flowing from the dual vents — cohesive, purposeful Varis Style 2 identity
- Fitment: Direct OEM bolt-on — factory CJ Lancer and EVO X hinge points and bonnet latch
- Washer Jets: Factory washer jet connection maintained — full windscreen washer function retained
- Clearance: All engine bay component clearances maintained — no modification required
Technical Specifications
| Specification | Details |
|---|---|
| Focus Keyword | Varis Style Carbon Fibre Bonnet 2 Mitsubishi Lancer EVO X |
| Fitment Years | 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 |
| Compatible Models | Mitsubishi Lancer (CJ), Mitsubishi Lancer Ralliart, Mitsubishi EVO X |
| Platform | CJ/CF Mitsubishi Lancer & EVO X (2008–2017) |
| Material | Genuine Woven Carbon Fibre |
| Finish | High-Gloss UV-Resistant Clear Coat |
| Vent Style | Varis Style 2 — dual sculpted vent configuration |
| Vent Count | Two precisely positioned sculpted openings |
| Installation | Direct OEM bolt-on — factory hinge and latch points |
| Weight Saving | Up to 50% lighter than factory steel bonnet |
| Hardware | All mounting hardware included |
| GEO Availability | Sydney, Melbourne, Brisbane, Perth, Adelaide, Australia-wide |
| Shipping | Australia-wide from Blacktown NSW warehouse |
Performance Benefits of the Varis Style Carbon Fibre Bonnet 2
Weight Reduction — Measurable Front-End Improvement
The Varis Style Carbon Fibre Bonnet 2 Mitsubishi Lancer EVO X delivers genuine front-end weight reduction through genuine carbon fibre construction.
Reducing bonnet weight by up to 50% compared to the factory steel unit directly impacts three key performance dimensions.
- Reduced Nose Weight: Less mass at the front of the car improves front-to-rear weight distribution — measurably sharpening turn-in response and improving mid-corner balance on the CJ Lancer and EVO X platform
- Lower Centre of Gravity: Removing weight from the highest point at the front of the car lowers the overall centre of gravity — reducing body roll during fast directional changes on mountain roads in Melbourne’s Dandenong Ranges and canyon runs near Brisbane
- Improved Steering Response: Less nose weight means the front tyres are more responsive to steering inputs — improving driver confidence and precision at all speeds across Sydney, Melbourne, Brisbane, and Perth roads
Dual-Vent Thermal Management — Better Than Single Vent
The dual-vent configuration of the Varis Style Carbon Fibre Bonnet 2 delivers measurably better engine bay thermal management than the single-vent Style 1.
- Increased Extraction Volume: Two vent openings extract a larger total volume of hot air per unit time than a single vent — maintaining lower engine bay temperatures during sustained performance driving
- Balanced Thermal Distribution: The dual-vent positioning extracts hot air from two points across the engine bay — creating a more balanced thermal extraction across the entire under-bonnet environment rather than the localised extraction of a single central vent
- Intercooler Support: Lower engine bay temperatures reduce heat soak to the front-mounted intercooler of the turbocharged Lancer Ralliart and EVO X — maintaining cooler charge air temperatures for consistent boost performance
- Track Day Advantage: The dual-vent extraction capacity maintains optimal engine bay temperatures across extended track sessions at Sydney Motorsport Park, Phillip Island, and Queensland Raceway — where sustained high-performance driving generates the most demanding thermal conditions
The Dual-Vent Advantage Over Single-Vent Designs
| Thermal Feature | Single-Vent Bonnet | Dual-Vent Varis Style 2 |
|---|---|---|
| Extraction Volume | Single opening | ✅ Two openings — more volume |
| Thermal Distribution | Localised | ✅ Balanced — two extraction points |
| Intercooler Support | Good | ✅ Better — lower bay temperature |
| Track Day Performance | Adequate | ✅ Superior — sustained extraction |
| Visual Complexity | Single vent | ✅ Dual vents — more aggressive |
Engine Bay Cooling – How the Dual Vents Work Together
Coordinated Thermal Extraction
The two vent openings in the Varis Style Carbon Fibre Bonnet 2 are not simply two isolated extraction points — they work together as a coordinated thermal management system.
High-pressure hot air accumulates across the engine bay during performance driving.
The dual vents position extraction points at two strategically chosen locations across the bonnet surface — creating two simultaneous low-pressure exhaust pathways that draw hot air from a broader area of the engine bay than any single central vent can achieve.
This is the same dual or multi-vent thermal management approach used in factory GT racing bonnets, WRC rally car bonnets, and the most serious production performance car bonnets in automotive history.
The Varis Style Carbon Fibre Bonnet 2 brings this coordinated dual-extraction approach to your Mitsubishi Lancer, Ralliart, or EVO X.
For track day thermal management and EVO X intercooler performance guides, visit MLOC Australia and NASIOC.
Varis Style Carbon Fibre Bonnet 2 in Your Complete Exterior Build
The Varis Style Carbon Fibre Bonnet 2 pairs powerfully with every other exterior upgrade in the Bodykitbae Mitsubishi range.
| Exterior Component | Product | Front-End Synergy |
|---|---|---|
| Bonnet | Varis Style CF Bonnet 2 ✅ | ⭐⭐⭐⭐⭐ Core front-end upgrade |
| Bonnet Scoop | Carbon Fibre EVO X Bonnet Scoop | ⭐⭐⭐⭐ Intercooler cooling addition |
| Front Bumper | Varis Style 1 / Varis Style 3 | ⭐⭐⭐⭐ Varis design continuity |
| Front Lip | Voltax Front Lip | ⭐⭐⭐⭐ Front splitter complement |
| Headlights | Vland Audi Style D2S HID | ⭐⭐⭐⭐⭐ Premium front lighting |
| Mirror Covers | Carbon Fibre / M3 Style | ⭐⭐⭐⭐ Carbon accent continuity |
| Vortex Generators | Carbon Fibre Vortex Generator | ⭐⭐⭐ Roofline aero complement |
Every product in this complete front-end build is available at Bodykitbae — making us Australia’s single source for the most comprehensive Mitsubishi exterior transformation available.
Fitment & Compatibility – Varis Style Carbon Fibre Bonnet 2
✅ Compatible Models
| Year | Model | Compatibility |
|---|---|---|
| 2008 | Mitsubishi Lancer (CJ) | ✅ Compatible |
| 2008 | Mitsubishi Lancer Ralliart | ✅ Compatible |
| 2008 | Mitsubishi EVO X | ✅ Compatible |
| 2009 | Mitsubishi Lancer (CJ) | ✅ Compatible |
| 2009 | Mitsubishi Lancer Ralliart | ✅ Compatible |
| 2009 | Mitsubishi EVO X | ✅ Compatible |
| 2010 | Mitsubishi Lancer (CJ) | ✅ Compatible |
| 2010 | Mitsubishi Lancer Ralliart | ✅ Compatible |
| 2010 | Mitsubishi EVO X | ✅ Compatible |
| 2011 | Mitsubishi Lancer (CJ) | ✅ Compatible |
| 2011 | Mitsubishi Lancer Ralliart | ✅ Compatible |
| 2011 | Mitsubishi EVO X | ✅ Compatible |
| 2012 | Mitsubishi Lancer (CJ) | ✅ Compatible |
| 2012 | Mitsubishi Lancer Ralliart | ✅ Compatible |
| 2012 | Mitsubishi EVO X | ✅ Compatible |
| 2013 | Mitsubishi Lancer (CJ) | ✅ Compatible |
| 2014 | Mitsubishi Lancer (CJ) | ✅ Compatible |
| 2015 | Mitsubishi Lancer (CJ) | ✅ Compatible |
| 2016 | Mitsubishi Lancer (CJ) | ✅ Compatible |
| 2017 | Mitsubishi Lancer (CJ) | ✅ Compatible |
❌ Not Compatible With
- Pre-2008 Mitsubishi Lancer (CS/CH generation — different bonnet dimensions and hinge points)
- Mitsubishi Lancer Sportback / Hatchback — different front body structure
- Mitsubishi Outlander, ASX, Eclipse Cross, or other Mitsubishi models
- Any Lancer or EVO X with pre-existing non-factory bonnet modifications affecting hinge or latch positions
Installation Guide – Varis Style Carbon Fibre Bonnet 2
The Varis Style Carbon Fibre Bonnet 2 is a direct OEM bolt-on replacement. Allow 1–2 hours and always use two people for safe carbon fibre panel handling.
Required Tools
- 10mm socket wrench and ratchet
- Phillips head screwdriver
- Masking tape (alignment and panel protection)
- Microfibre cloths
- Isopropyl alcohol (panel cleaning)
- Second person for safe panel handling
Step-by-Step Installation
- Prop Factory Bonnet: Open and safely prop the factory bonnet using the factory bonnet stay rod
- Disconnect Washer Jets: Unplug the windscreen washer jet hose from the factory bonnet underside
- Mark Hinge Position: Apply masking tape alongside factory hinge bolts and mark exact hinge position for reference
- Remove Factory Bonnet: With a second person supporting the panel, unbolt the four hinge bolts using a 10mm socket
- Set Factory Bonnet Aside: Carefully place the factory steel bonnet on a soft surface
- Transfer Stay Bracket: Remove the bonnet stay rod bracket from the factory bonnet and transfer to the Varis Style Carbon Fibre Bonnet 2
- Position Carbon Bonnet: With your second person, carefully position the Varis Style Carbon Fibre Bonnet 2 onto the factory hinges — align to masking tape reference marks
- Hand-Tighten Bolts: Insert and hand-tighten all four hinge bolts — do not fully tighten yet
- Check Panel Gaps: Gently close the bonnet and check gaps against both front quarter panels — adjust hinge position as needed
- Fully Torque Bolts: Once gaps are confirmed even, tighten hinge bolts to factory specification
- Reconnect Washer Jets: Reconnect the windscreen washer jet hose to the carbon bonnet
- Check Latch: Gently close the bonnet — confirm the latch engages cleanly and securely
- Final Inspection: Confirm all panel gaps are even, bonnet sits flush with guards, and all hardware is secure
⚠️ Important: Always use two people when handling carbon fibre bonnet panels. Never place tools directly on the gloss carbon surface — always use a microfibre cloth as a barrier. Confirm both dual-vent openings are free of obstruction after installation — clear airflow through both vents is essential for the Style 2’s thermal management performance. Professional installation is recommended across Sydney, Melbourne, Brisbane, and Perth.
For EVO X carbon bonnet installer referrals and community fitment guides, visit MLOC Australia and NASIOC.
GEO Targeting – Varis Style Carbon Fibre Bonnet 2 Available Across Australia
The Varis Style Carbon Fibre Bonnet 2 Mitsubishi Lancer EVO X is available for fast delivery Australia-wide:
| Location | Delivery Estimate | Mitsubishi Community |
|---|---|---|
| Sydney, NSW | 2–4 business days | ⭐ Largest Mitsubishi Community |
| Melbourne, VIC | 3–5 business days | ⭐ Most Popular |
| Brisbane, QLD | 4–6 business days | ⭐ High Demand |
| Perth, WA | 6–9 business days | ⭐ High Demand |
| Adelaide, SA | 4–6 business days | ⭐ Growing |
| Canberra, ACT | 2–4 business days | ⭐ Growing |
| Hobart, TAS | 5–8 business days | ✅ Available |
| Darwin, NT | 7–10 business days | ✅ Available |
Bodykitbae ships the Varis Style Carbon Fibre Bonnet 2 Australia-wide from our Blacktown, Sydney NSW warehouse. Order before 12PM AEST for same-day dispatch on business days.
Why Choose Bodykitbae for Your Varis Style Carbon Fibre Bonnet 2 in Australia?
Bodykitbae is Australia’s most trusted specialist in premium Mitsubishi carbon fibre bonnets, Varis-style body kit components, and aerodynamic upgrades. Based in Blacktown, Sydney NSW, we serve Lancer, Ralliart, and EVO X owners across Sydney, Melbourne, Brisbane, Perth, and Adelaide.
- ✅ Sydney-based Mitsubishi specialists — fast same-day dispatch from Blacktown NSW
- ✅ Genuine carbon fibre — not fibreglass or carbon-look vinyl
- ✅ Full Varis bonnet range — FA, Style 1, Style 2, Style 8, and more available
- ✅ Direct OEM bolt-on fitment — factory hinge and latch points
- ✅ Australia-wide shipping with full tracking on every order
- ✅ Expert Mitsubishi carbon bonnet advice — call or message our Sydney team
- ✅ 5-star Google rated by real Australian Mitsubishi customers
- ✅ Multiple payment options including buy now pay later
Related Products & Internal Links
Complete your Mitsubishi Lancer, Ralliart, or EVO X exterior and interior build with these products from Bodykitbae:
Bonnets & Carbon Exterior
- Mitsubishi Bonnets – Full Mitsubishi carbon bonnet range
- Exterior Accessories – Full exterior accessory range
- Mitsubishi Fenders – Wide-body fender upgrades
Body Kit & Aero
- Mitsubishi Front Bumper – Aggressive front bumper conversions
- Mitsubishi Spoiler – EVO X and Lancer rear wings
- Mitsubishi Diffuser – Rear aerodynamic diffusers
- Mitsubishi Side Skirts – Side aero upgrades
Interior & Lighting
- Interior Accessories – Full Mitsubishi interior range
- Mitsubishi Seats – Racing seats and harnesses
- Mitsubishi Headlight – LED headlight upgrades
- Mitsubishi TailLights – Custom rear lighting
Shop All
- Shop All Products
- Mitsubishi – Full Mitsubishi catalogue
SEO FAQs – Varis Style Carbon Fibre Bonnet 2 Mitsubishi Lancer EVO X
What makes the Varis Style Carbon Fibre Bonnet 2 different from the Style 1 and Style 8?
The Varis Style Carbon Fibre Bonnet 2 Mitsubishi Lancer EVO X features a dual sculpted vent design — two precisely positioned vent openings that deliver better engine bay thermal extraction than the single-vent Style 1 while maintaining more visual restraint than the complex multi-vent Style 8. It is the most versatile and most popular Varis bonnet variant across the range — aggressive enough for clear performance intent, refined enough for every build environment from street to show to track.
Is the Varis Style Carbon Fibre Bonnet 2 a direct fit for my 2014 Mitsubishi EVO X?
Yes! The Varis Style Carbon Fibre Bonnet 2 is a direct OEM bolt-on replacement for the 2008–2017 Mitsubishi Lancer CJ and EVO X platform, including the 2014 EVO X. It uses the factory hinge points and bonnet latch — no cutting or modification required. Always use two people for safe carbon fibre panel handling.
Is the carbon fibre genuine or a vinyl wrap?
The Varis Style Carbon Fibre Bonnet 2 features genuine woven carbon fibre construction with a UV-resistant high-gloss clear coat — not a carbon vinyl wrap, carbon-look paint, or fibreglass panel. It is real structural carbon fibre — the same material quality used in motorsport, aerospace, and premium supercar manufacturing.
How much weight does the Varis Style Carbon Fibre Bonnet 2 save compared to the factory bonnet?
The Varis Style Carbon Fibre Bonnet 2 can reduce bonnet weight by up to 50% compared to the factory steel unit — directly reducing nose weight, lowering the centre of gravity, and improving the front-to-rear weight balance of your CJ Lancer or EVO X.
Does Bodykitbae ship the Varis Style Carbon Fibre Bonnet 2 across Australia?
Yes. We ship Australia-wide from our Blacktown, Sydney NSW warehouse. Sydney and Canberra in 2–4 business days. Melbourne and Brisbane in 3–6 days. Perth and Darwin in 6–10 days. Contact our Sydney team for a specific delivery estimate.
Why choose the dual-vent Style 2 over the single-vent Style 1?
The Varis Style Carbon Fibre Bonnet 2 delivers better engine bay thermal extraction than the Style 1 through its dual vent configuration — extracting hot air from two points across the bonnet surface for a more balanced and more efficient thermal management result. It also delivers greater visual complexity and more aggressive Varis identity than the Style 1, making it the preferred choice for builds that want clear performance character without the full commitment of the Style 8.
Where in Australia can I buy the Varis Style Carbon Fibre Bonnet 2 for Mitsubishi Lancer EVO X?
The Varis Style Carbon Fibre Bonnet 2 Mitsubishi Lancer EVO X is available at Bodykitbae and ships to Sydney, Melbourne, Brisbane, Perth, Adelaide, Canberra, Hobart, Darwin, and all regional areas. Visit bodykitbae.com.au or contact our Blacktown Sydney team directly.
Reviews
There are no reviews yet.