Description
Carbon Fibre Side Pillar Covers – Best Mitsubishi Lancer EVO X Interior Upgrade Australia
Get the best Carbon Fibre Side Pillar Covers for Mitsubishi Lancer & EVO X. Genuine carbon trim, easy fit, no drilling, AU-wide shipping. Shop Bodykitbae!
Carbon Fibre Side Pillar Covers – Best Mitsubishi Lancer EVO X Interior Upgrade Australia
Carbon Fibre Side Pillar Covers Mitsubishi Lancer EVO X are the most impactful and most premium interior pillar trim upgrade for Mitsubishi Lancer, Lancer Ralliart, and EVO X owners across Australia.
Precision-moulded to fit directly over the factory A-pillar, B-pillar, and C-pillar trim panels, these genuine carbon fibre covers transform the most structurally prominent interior surfaces in your Mitsubishi cabin — replacing the plain factory plastic pillar trims with stunning exposed gloss carbon weave that is visible from every seating position, at every angle, and in every light condition inside the car.
The Carbon Fibre Side Pillar Covers are the interior upgrade that takes a carbon trim build from impressive to complete — because the pillars frame the entire cabin environment and their material finish sets the visual tone for everything inside the car.
At Bodykitbae in Blacktown, Sydney NSW, we supply the best aftermarket carbon fibre interior trim upgrades, pillar covers, and Mitsubishi interior accessories to enthusiasts across Sydney, Melbourne, Brisbane, Perth, and Adelaide. If you are searching for the best Carbon Fibre Side Pillar Covers for your Mitsubishi Lancer or EVO X in Australia, you have found them.
Product Overview
The Carbon Fibre Side Pillar Covers Mitsubishi Lancer EVO X are a precision-cut set of genuine carbon fibre overlay covers for the A-pillar, B-pillar, and C-pillar trim panels inside your Mitsubishi cabin.
The pillars are the vertical structural members that frame the windscreen, side windows, and rear glass — their trim panels are among the largest and most visible interior surfaces in the entire cabin.
In the factory specification, all pillar trims in the 2008–2017 Mitsubishi Lancer, Ralliart, and EVO X are plain black moulded plastic — functional, durable, and entirely ordinary.
The Carbon Fibre Side Pillar Covers replace this factory plastic appearance with genuine woven carbon fibre — immediately visible to every occupant from every seating position, creating a cohesive carbon fibre interior environment that elevates the entire cabin quality.
The pillar covers work together as a complete set — the A-pillars frame the windscreen view, the B-pillars are visible at shoulder height from both front and rear seats, and the C-pillars complete the rear cabin carbon treatment.
When all three pillar positions are covered in carbon fibre, the cabin transforms from a production car interior into something that looks genuinely purpose-built.
For Mitsubishi Lancer and EVO X interior trim reference, visit Mitsubishi Australia and MLOC Australia. For carbon interior build galleries, visit NASIOC and FT86Club.
Why the Carbon Fibre Side Pillar Covers are the Best Interior Trim Upgrade
The side pillars are the most structurally dominant interior surfaces in any car.
They are tall, wide, and positioned at precisely the angles where every occupant’s peripheral vision naturally rests — making them the interior trim panels that are seen more consistently than almost any other surface in the cabin.
The factory pillar trims in the 2008–2017 Lancer and EVO X are plain black plastic — and while black plastic does not actively detract from the interior, it contributes nothing to the premium or motorsport identity that serious Mitsubishi enthusiasts across Sydney, Melbourne, Brisbane, and Perth are building.
The Carbon Fibre Side Pillar Covers Mitsubishi Lancer EVO X change this across the entire cabin simultaneously.
A full set of carbon fibre pillar covers — A, B, and C pillar — creates a complete carbon fibre structural frame around the entire cabin interior.
Every occupant sees carbon fibre. From every angle. At every moment inside the car.
This is why Mitsubishi enthusiasts across Australia consistently rate the carbon pillar covers as the most transformative interior trim upgrade available for the platform.
For Mitsubishi interior carbon trim reference and cabin upgrade guides, visit Motor Trend’s Mitsubishi coverage and Car and Driver.
Key Features of the Carbon Fibre Side Pillar Covers
Carbon Fibre Side Pillar Covers – Construction & Finish
- Material: Genuine woven carbon fibre with UV-resistant high-gloss clear coat
- Finish: Exposed gloss carbon weave — deep, rich texture visible from every interior angle
- Construction: Precision-cut carbon fibre overlays — engineered for exact Mitsubishi pillar trim dimensions
- Thickness: Ultra-thin carbon fibre profile — does not reduce headroom or window clearance
- UV Resistance: Multi-layer UV clear coat — will not fade, yellow, or crack under Australian interior sun exposure
- Durability: High-strength carbon fibre — resistant to everyday contact, UV, and interior temperature cycling
- Kit Contents: Full set of A-pillar, B-pillar, and C-pillar carbon fibre covers — complete cabin coverage
Carbon Fibre Side Pillar Covers – Pillar by Pillar Coverage
A-Pillar Carbon Fibre Covers
- Position: Front windscreen pillars — left and right
- Visibility: Visible to driver and front passenger — frames the entire windscreen view
- Factory Trim: Plain black plastic — often houses tweeter speaker grilles in some variants
- Carbon Upgrade: Full A-pillar carbon fibre overlay — dramatic improvement to the most frequently viewed pillar position
- Speaker Grille: Precision cutouts for factory tweeter positions where fitted
B-Pillar Carbon Fibre Covers
- Position: Central door pillars between front and rear doors — left and right
- Visibility: Visible to all four occupants — the most universally visible pillar in the cabin
- Factory Trim: Plain black plastic — seat belt guide mounting point integrated
- Carbon Upgrade: Full B-pillar carbon fibre overlay — carbon visible to every occupant simultaneously
- Seat Belt Clearance: Precision cutout for factory seat belt guide — full seat belt function retained
C-Pillar Carbon Fibre Covers
- Position: Rear quarter pillars behind the rear doors — left and right
- Visibility: Visible to rear occupants and from outside through rear quarter glass
- Factory Trim: Plain black plastic — completes the rear cabin pillar treatment
- Carbon Upgrade: Full C-pillar carbon fibre overlay — completes the full cabin carbon pillar frame
Technical Specifications
| Specification | Details |
|---|---|
| Focus Keyword | Carbon Fibre Side Pillar Covers Mitsubishi Lancer EVO X |
| Fitment Years | 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 |
| Compatible Models | Mitsubishi Lancer (CJ), Mitsubishi Lancer Ralliart, Mitsubishi EVO X |
| Platform | CJ/CF Mitsubishi Lancer & EVO X (2008–2017) |
| Material | Genuine Woven Carbon Fibre |
| Finish | High-Gloss UV-Resistant Clear Coat |
| Coverage | A-Pillar, B-Pillar, and C-Pillar — full set |
| Kit Contents | Left and right covers for all three pillar positions |
| Seat Belt Cutout | ✅ B-pillar — factory seat belt guide retained |
| Speaker Cutout | ✅ A-pillar — factory tweeter position retained |
| Installation | Adhesive overlay — no drilling required |
| GEO Availability | Sydney, Melbourne, Brisbane, Perth, Adelaide, Australia-wide |
| Shipping | Australia-wide from Blacktown NSW warehouse |
The Complete Carbon Fibre Interior Cabin – Pillar Covers in Context
Building a Full Carbon Fibre Interior
The Carbon Fibre Side Pillar Covers are the structural frame of a complete carbon fibre interior build.
When combined with the other carbon and Ralliart interior upgrades available at Bodykitbae, the pillar covers complete a cabin environment that is entirely cohesive — carbon fibre from the pillar frames to the dashboard, from the seat belts to the AC controls.
| Interior Surface | Carbon Upgrade | Cabin Coverage |
|---|---|---|
| A, B, C Pillars | Carbon Fibre Side Pillar Covers ✅ | ✅ Full cabin structural frame |
| Dashboard | Front Dashmat Ralliart Logo | ✅ Forward cabin |
| Rear Shelf | Rear Dashmat Red / Blue Lining | ✅ Rear cabin |
| AC Panel | Carbon Fibre AC Panel Cover | ✅ Centre console |
| AC Buttons | AC Button Trim Covers | ✅ Centre console detail |
| Seat Belts | Carbon Fibre Seat Belt Cushion Covers | ✅ Pillar-adjacent |
| Steering Wheel | Carbon Fibre Steering Wheel Gauge | ✅ Driver focal point |
| Mirror Covers | Carbon Fibre Side Mirror Covers | ✅ External — all angles |
Every product in this complete cabin build is available at Bodykitbae — your single Australian destination for the most comprehensive Mitsubishi carbon interior transformation available.
Why Pillar Covers Complete the Interior Build
Interior carbon fibre upgrades follow a visual hierarchy.
Small components — AC button covers, seat belt cushion covers — add carbon detail at close range.
Medium components — AC panel cover, dashmat, mirror covers — add carbon presence at mid range.
The Carbon Fibre Side Pillar Covers operate at the largest scale — they are the structural frame of the entire cabin, visible from every position, at every distance, in every direction inside the car.
Without the pillar covers, the best carbon interior build still has plain black plastic framing the entire cabin.
With the Carbon Fibre Side Pillar Covers, the build is complete — the carbon fibre interior has a structural frame that ties every other carbon detail together.
Carbon Fibre Side Pillar Covers vs Factory Plastic Trim
| Feature | Factory Plastic Pillar Trim | Carbon Fibre Pillar Covers |
|---|---|---|
| Material | Moulded black plastic | ✅ Genuine woven carbon fibre |
| Appearance | Plain flat black | ✅ Deep gloss carbon weave |
| UV Resistance | May fade over time | ✅ UV-resistant clear coat |
| Scratch Resistance | Scratches with contact | ✅ Carbon fibre — more resistant |
| Visual Impact | Zero — invisible | ✅ Maximum — structural cabin frame |
| Cabin Identity | Standard production car | ✅ Motorsport-grade carbon interior |
| Installation | Factory fitted | ✅ Simple adhesive overlay |
The Carbon Fibre Side Pillar Covers upgrade every dimension of the factory pillar trim — material quality, visual presence, UV resistance, and cabin identity.
Fitment & Compatibility – Carbon Fibre Side Pillar Covers
✅ Compatible Models
| Year | Model | Compatibility |
|---|---|---|
| 2008 | Mitsubishi Lancer (CJ) | ✅ Compatible |
| 2008 | Mitsubishi Lancer Ralliart | ✅ Compatible |
| 2008 | Mitsubishi EVO X | ✅ Compatible |
| 2009 | Mitsubishi Lancer (CJ) | ✅ Compatible |
| 2009 | Mitsubishi Lancer Ralliart | ✅ Compatible |
| 2009 | Mitsubishi EVO X | ✅ Compatible |
| 2010 | Mitsubishi Lancer (CJ) | ✅ Compatible |
| 2010 | Mitsubishi Lancer Ralliart | ✅ Compatible |
| 2010 | Mitsubishi EVO X | ✅ Compatible |
| 2011 | Mitsubishi Lancer (CJ) | ✅ Compatible |
| 2011 | Mitsubishi Lancer Ralliart | ✅ Compatible |
| 2011 | Mitsubishi EVO X | ✅ Compatible |
| 2012 | Mitsubishi Lancer (CJ) | ✅ Compatible |
| 2012 | Mitsubishi Lancer Ralliart | ✅ Compatible |
| 2012 | Mitsubishi EVO X | ✅ Compatible |
| 2013 | Mitsubishi Lancer (CJ) | ✅ Compatible |
| 2014 | Mitsubishi Lancer (CJ) | ✅ Compatible |
| 2015 | Mitsubishi Lancer (CJ) | ✅ Compatible |
| 2016 | Mitsubishi Lancer (CJ) | ✅ Compatible |
| 2017 | Mitsubishi Lancer (CJ) | ✅ Compatible |
❌ Not Compatible With
- Pre-2008 Mitsubishi Lancer (CS/CH generation — different pillar trim dimensions)
- Mitsubishi Lancer Sportback / Hatchback — different C-pillar structure
- Mitsubishi Outlander, ASX, Eclipse Cross, or other Mitsubishi models
- Any variant with pre-existing aftermarket pillar modifications that alter factory trim dimensions
Installation Guide – Carbon Fibre Side Pillar Covers
Installing your Carbon Fibre Side Pillar Covers Mitsubishi Lancer EVO X is a straightforward adhesive overlay process. Allow approximately 1–2 hours for a complete full-cabin installation of all six covers.
Required Tools
- Isopropyl alcohol (pillar trim cleaning — essential)
- Microfibre cloths
- Masking tape (alignment marking)
- Heat gun or hair dryer (adhesive activation)
- Plastic trim removal tool (optional — for factory trim surface access)
- Ruler or tape measure (alignment reference)
Step-by-Step Installation — Full Set
- Clean All Pillar Surfaces: Thoroughly clean every factory pillar trim surface with isopropyl alcohol — remove all wax, polish, dust, and hand oils from all A, B, and C pillar positions on both sides
- Dry All Surfaces: Allow isopropyl alcohol to fully evaporate from all surfaces — they must be completely dry before proceeding
- Lay Out All Covers: Unpack all six Carbon Fibre Side Pillar Covers and lay them out in order — left and right for each of the A, B, and C pillar positions. Confirm all covers and verify correct left/right orientation for each
- Dry Fit Each Cover: Starting with the A-pillar covers, hold each cover against its corresponding factory pillar trim without adhesive — confirm alignment, speaker grille cutout position, and edge coverage
- Mark Alignment: Use masking tape to mark the exact position of each cover on each pillar trim — work through all six positions before beginning adhesive installation
- Begin Installation — A-Pillars: Activate adhesive on the first A-pillar cover using a heat gun for 15–20 seconds. Peel backing, align to masking tape markers, and press firmly for 30–60 seconds
- Continue — Opposite A-Pillar: Repeat the process for the opposite A-pillar cover — confirm symmetrical positioning against the driver side
- Install B-Pillar Covers: Activate, align, and press each B-pillar cover — confirm seat belt guide cutout aligns correctly with factory seat belt guide on both sides
- Install C-Pillar Covers: Activate, align, and press each C-pillar cover — confirm full coverage of the rear quarter pillar trim on both sides
- Remove All Masking Tape: Carefully peel away all alignment tape from all six pillar positions
- Final Visual Inspection: Step back and assess all six cover positions from inside the cabin — confirm symmetrical positioning across all three pillar levels on both sides
- Check All Cutouts: Verify all speaker grille and seat belt guide cutouts are correctly aligned and fully functional
- Cure Time: Allow 24 hours before operating seat belts through B-pillar guides and before any door seal pressure is applied
✅ No permanent modification required. All six Carbon Fibre Side Pillar Covers are designed for non-destructive adhesive installation — all factory pillar trims are fully preserved underneath each cover. Install in order from A to C pillars on each side for the most efficient and most consistent result.
Install in a warm environment — cold temperatures significantly reduce adhesive bond strength. Ensure all surfaces are completely wax-free before installation. Take extra care with B-pillar seat belt guide cutout alignment — the seat belt must operate freely through the guide after installation. Professional installation is recommended across Sydney, Melbourne, Brisbane, and Perth for the most precise full-cabin symmetry result.
GEO Targeting – Carbon Fibre Side Pillar Covers Available Across Australia
The Carbon Fibre Side Pillar Covers Mitsubishi Lancer EVO X are available for fast delivery Australia-wide:
| Location | Delivery Estimate | Mitsubishi Community |
|---|---|---|
| Sydney, NSW | 2–4 business days | ⭐ Largest Mitsubishi Community |
| Melbourne, VIC | 3–5 business days | ⭐ Most Popular |
| Brisbane, QLD | 4–6 business days | ⭐ High Demand |
| Perth, WA | 6–9 business days | ⭐ High Demand |
| Adelaide, SA | 4–6 business days | ⭐ Growing |
| Canberra, ACT | 2–4 business days | ⭐ Growing |
| Hobart, TAS | 5–8 business days | ✅ Available |
| Darwin, NT | 7–10 business days | ✅ Available |
Bodykitbae ships the Carbon Fibre Side Pillar Covers Australia-wide from our Blacktown, Sydney NSW warehouse. Order before 12PM AEST for same-day dispatch on business days.
Why Choose Bodykitbae for Your Carbon Fibre Side Pillar Covers in Australia?
Bodykitbae is Australia’s most trusted specialist in premium Mitsubishi interior carbon fibre trim upgrades, pillar covers, and interior accessories. Based in Blacktown, Sydney NSW, we serve Lancer, Ralliart, and EVO X owners across Sydney, Melbourne, Brisbane, Perth, and Adelaide.
- ✅ Sydney-based Mitsubishi specialists — fast same-day dispatch from Blacktown NSW
- ✅ Genuine carbon fibre — not carbon-look vinyl or cheap ABS overlay
- ✅ Full A, B, and C pillar coverage — complete cabin carbon frame in one kit
- ✅ Precision-moulded for CJ Lancer and EVO X pillar dimensions
- ✅ Australia-wide shipping with full tracking on every order
- ✅ Expert Mitsubishi interior carbon advice — call or message our Sydney team
- ✅ 5-star Google rated by real Australian Mitsubishi customers
- ✅ Multiple payment options including buy now pay later
Related Products & Internal Links
Complete your Mitsubishi Lancer, Ralliart, or EVO X interior and exterior carbon build with these products from Bodykitbae:
Interior Carbon Trim
- Interior Accessories – Full Mitsubishi interior upgrade range
- Mitsubishi Seats – Racing seats and harnesses
Exterior & Aero
- Exterior Accessories – Full exterior accessory range
- Mitsubishi Bonnets – Carbon fibre bonnet upgrades
- Mitsubishi Spoiler – EVO X and Lancer rear wings
- Mitsubishi Front Bumper – Aggressive front bumper conversions
- Mitsubishi Diffuser – Rear aerodynamic diffusers
- Mitsubishi Side Skirts – Side aero upgrades
- Mitsubishi Fenders – Wide-body fender upgrades
Lighting
- Mitsubishi Headlight – LED headlight upgrades
- Mitsubishi TailLights – Custom rear lighting
Shop All
- Shop All Products
- Mitsubishi – Full Mitsubishi catalogue
SEO FAQs – Carbon Fibre Side Pillar Covers Mitsubishi Lancer EVO X
What are Carbon Fibre Side Pillar Covers and which pillars do they cover?
The Carbon Fibre Side Pillar Covers Mitsubishi Lancer EVO X are a complete set of genuine carbon fibre overlay covers for the A-pillar (front windscreen pillars), B-pillar (central door pillars), and C-pillar (rear quarter pillars) trim panels inside your Mitsubishi cabin. The full kit includes left and right covers for all three pillar positions — six covers in total — creating a complete carbon fibre structural frame around the entire cabin interior.
Are the Carbon Fibre Side Pillar Covers a direct fit for my 2016 Mitsubishi Lancer?
Yes! The Carbon Fibre Side Pillar Covers are precision-cut for the 2008–2017 Mitsubishi Lancer CJ platform, including the 2016 model year. They clip or adhere directly over the factory pillar trim panels — no drilling, cutting, or permanent modification required. All factory features including speaker grilles and seat belt guides are preserved through precision cutouts.
Is the carbon fibre on the pillar covers genuine or a vinyl wrap?
The Carbon Fibre Side Pillar Covers feature genuine woven carbon fibre construction with a UV-resistant high-gloss clear coat — not a carbon vinyl wrap or carbon-look ABS overlay. Every cover is real structural carbon fibre delivering genuine depth, texture, and premium quality that no vinyl wrap can replicate.
Will the Carbon Fibre Side Pillar Covers affect my seat belt function?
No. The B-pillar Carbon Fibre Cover features a precision-cut seat belt guide opening that fully retains the factory seat belt routing and operation. The ultra-thin carbon fibre profile does not restrict or alter seat belt function in any way — a critical safety requirement that Bodykitbae takes seriously across every pillar cover in the kit.
Does Bodykitbae ship the Carbon Fibre Side Pillar Covers across Australia?
Yes. We ship Australia-wide from our Blacktown, Sydney NSW warehouse. Sydney and Canberra in 2–4 business days. Melbourne and Brisbane in 3–6 days. Perth and Darwin in 6–10 days. Contact our Sydney team for a specific delivery estimate.
Will the Carbon Fibre Side Pillar Covers fit the Mitsubishi EVO X?
Yes. The Carbon Fibre Side Pillar Covers are fully compatible with the Mitsubishi EVO X (2008–2012) which uses the CJ Lancer cabin architecture and pillar trim dimensions. They are a highly popular full-cabin carbon interior upgrade for EVO X builds across Sydney, Melbourne, and Brisbane — transforming the entire cabin structural frame in a single installation.
Where in Australia can I buy Carbon Fibre Side Pillar Covers for Mitsubishi Lancer?
The Carbon Fibre Side Pillar Covers Mitsubishi Lancer EVO X are available at Bodykitbae and ship to Sydney, Melbourne, Brisbane, Perth, Adelaide, Canberra, Hobart, Darwin, and all regional areas. Visit bodykitbae.com.au or contact our Blacktown Sydney team directly.
Keyword Optimization Map
| Keyword | Type | Placement |
|---|---|---|
| Carbon Fibre Side Pillar Covers Mitsubishi Lancer EVO X | Focus / Primary | H1 (start), Meta Title, Meta Desc, URL, Para 1, H2s, H3s, FAQs |
| carbon pillar covers Mitsubishi Lancer Australia | Secondary | H2, body text, FAQ |
| EVO X carbon A B C pillar trim covers | Secondary | H2, body text, specs table |
| carbon pillar covers Lancer EVO X Sydney Melbourne | GEO Long-tail | GEO table, FAQ, body text |
| buy carbon interior pillar trim Brisbane Perth | GEO Long-tail | GEO table, body text |
| Mitsubishi EVO X interior carbon trim Adelaide Canberra | GEO Long-tail | GEO table, FAQ |
| best carbon pillar covers Mitsubishi Lancer Australia | Sentiment | Meta title, H1, H2 |
| CJ Lancer EVO X A B C pillar carbon overlay adhesive | Technical | Specs table, install guide |
Reviews
There are no reviews yet.