Description
Varis Style Carbon Fibre Bonnet 6 – Best Mitsubishi Lancer EVO X Bonnet Upgrade Australia
Buy the Varis Style Carbon Fibre Bonnet 6 for Mitsubishi Lancer EVO X & Ralliart. Carbon/FRP, Japanese aero design, AU-wide shipping. Shop Bodykitbae Sydney today
Varis Style Carbon Fibre Bonnet 6 – Best Mitsubishi Lancer EVO X Bonnet Upgrade Australia
Varis Style Carbon Fibre Bonnet 6 Mitsubishi Lancer EVO X is the most visually dramatic, most weight-reducing bonnet upgrade available for Mitsubishi Lancer, Lancer Ralliart, and EVO X owners across Australia.
Constructed from genuine carbon fibre and FRP — and styled after the iconic Varis Japanese aero catalogue — the Varis Style Carbon Fibre Bonnet 6 replaces the factory steel bonnet of your 2008-onwards Mitsubishi Lancer, Ralliart, or EVO X with a lightweight, ventilated, competition-derived bonnet design that transforms the top-down visual identity of your build from every angle.
The number 6 designation identifies this specific bonnet’s vent and scoop configuration — a multi-vent, raised-centre profile that distinguishes it from every other bonnet in the nine-strong Bodykitbae carbon fibre bonnet range. Bold vent geometry. Aggressive raised centre line. Genuine exposed carbon fibre weave. The visual statement that only a Varis-style carbon bonnet on a Lancer or EVO X can make.
At Bodykitbae in Blacktown, Sydney NSW, we supply the best aftermarket carbon fibre bonnets, body kits, and Mitsubishi performance accessories to enthusiasts across Sydney, Melbourne, Brisbane, Perth, and Adelaide. If you are searching for the Varis Style Carbon Fibre Bonnet 6 for your Mitsubishi Lancer, Ralliart, or EVO X in Australia, you have found the right place.
For authoritative reference on carbon fibre bonnet construction standards and aftermarket bonnet fitment guides, visit Mitsubishi Motors Australia and the CAMS / Motorsport Australia Technical Regulations for approved bonnet fastening requirements on modified vehicles used in competition.
Table of Contents
- Product Overview
- The Varis Carbon Bonnet Legacy – Why Design 6 Stands Apart
- Why the Varis Style Carbon Fibre Bonnet 6 is the Best Bonnet Upgrade
- Varis Style Carbon Fibre Bonnet 6 vs Full Bonnet Range – Complete Comparison
- Key Features – Carbon Fibre / FRP Construction
- Technical Specifications
- The Visual and Performance Transformation
- Varis Style Carbon Fibre Bonnet 6 in Your Complete Exterior Build
- Fitment & Compatibility
- Carbon Fibre Bonnet Care & Maintenance
- Installation Guide
- GEO Targeting – Available Across Australia
- Why Choose Bodykitbae
- Related Products & Internal Links
- SEO FAQs
- Keyword Optimisation Map
Product Overview
The Varis Style Carbon Fibre Bonnet 6 Mitsubishi Lancer EVO X is a complete OEM-replacement bonnet constructed from carbon fibre and FRP — designed to fit the 2008-onwards Mitsubishi Lancer CJ, Lancer Ralliart, and EVO X platform as a direct replacement for the factory steel bonnet.
The bonnet is the largest single exterior panel on any car. It defines the top-down visual identity of the build from drone photos, show stands, and every overhead angle. It is the component that separates builds that take the top-down perspective seriously from builds that do not.
The factory Mitsubishi Lancer and EVO X steel bonnet is heavy, flat, and communicates nothing about the build beneath it.
The Varis Style Carbon Fibre Bonnet 6 communicates everything.
The exposed carbon fibre weave is visible from across a car park. The raised centre line and multi-vent profile create a three-dimensional top-down silhouette that no flat steel bonnet can approach. And the carbon fibre and FRP construction removes significant weight from the front of the car — reducing front axle load, improving front-to-rear weight balance, and delivering the kind of bonnet presence that only genuine carbon construction achieves.
At $1,300.00 AUD — matching the price of Bonnets 5 and 8 in the range and sitting $100.00 to $199.00 below the more complex variants — the Varis Style Carbon Fibre Bonnet 6 delivers exceptional value at the premium carbon bonnet price point.
The Varis Carbon Bonnet Legacy – Why Design 6 Stands Apart
The Varis aftermarket aero catalogue is among the most respected in Japanese performance car culture. Varis bonnets have appeared on some of Japan’s most iconic time attack cars, Super GT support vehicles, and high-profile JDM street builds — photographed at Tsukuba Circuit, Fuji Speedway, and every major Japanese and Australian car show over the past two decades.
Within the nine-bonnet Bodykitbae Varis carbon fibre range, each design number identifies a distinct vent and scoop configuration. The Bonnet 6 design is defined by its multi-vent raised centre profile — a specific Varis aero design element that balances visual aggression with the functional bonnet vent geometry associated with high-power turbocharged engine bay heat extraction.
For deeper reference on Varis aero design philosophy and the role of bonnet venting in Japanese time attack car preparation, see Japan’s Super Taikyu Series and Option Magazine’s coverage of Tsukuba time attack builds — the two sources most closely associated with the Japanese tuning culture from which the Varis bonnet design language originates.
This is not a generic carbon bonnet. It is a specific, identifiable Varis design element — and the Lancer and EVO X community across Sydney, Melbourne, Brisbane, and Perth will recognise exactly what it is referencing.
Why the Varis Style Carbon Fibre Bonnet 6 is the Best Bonnet Upgrade for Mitsubishi Lancer EVO X
1. Genuine Carbon Fibre Construction – Not Carbon Look, Not Vinyl Wrap
The Varis Style Carbon Fibre Bonnet 6 is constructed from actual carbon fibre and FRP — not carbon-look vinyl wrap applied to a steel panel, not printed ABS plastic with a weave pattern, not a glossy black bonnet that approximates carbon from a distance.
Genuine carbon fibre weave is visible up close, catches light differently at every angle, and delivers the weight reduction that only real carbon construction can achieve. There is no substitute for the real material — and the Varis Style Carbon Fibre Bonnet 6 uses the real material.
For independent reference on the weight and structural properties of carbon fibre composite bonnet construction versus steel OEM panels, see Composites Australia — Australia’s peak body for composite materials information and industry standards.
2. Significant Weight Reduction – Real Performance Benefit
The factory Mitsubishi Lancer and EVO X steel bonnet is a heavy component — typically 12–18kg depending on model year. The Varis Style Carbon Fibre Bonnet 6 replaces that weight with a carbon fibre and FRP assembly that is significantly lighter — reducing front axle unsprung and sprung mass simultaneously.
For a Lancer used on track days in Sydney, Melbourne, or Brisbane — the front-to-rear weight balance improvement from a carbon bonnet replacement is a genuine, measurable handling benefit that no exterior styling upgrade alone can replicate.
3. Nine Bonnet Designs Available – Design 6 for a Specific Build Direction
Bodykitbae carries nine carbon fibre bonnet options for the Mitsubishi Lancer and EVO X platform. The Bonnet 6 design is the choice for builds seeking a multi-vent raised-centre profile — more aggressive than the single-vent designs, with a specific Varis aero visual character that distinguishes it from every other bonnet in the range.
Varis Style Carbon Fibre Bonnet 6 vs Full Bonnet Range – Complete Comparison
| Bonnet | Style | Material | Price | Best For |
|---|---|---|---|---|
| Varis Style Carbon Fibre Bonnet 6 | Multi-vent raised centre — Varis aero | Carbon Fibre / FRP | $1,300.00 | Show cars, track builds, JDM aero direction |
| Varis Style Carbon Fibre Bonnet 1 | Single vent — Varis classic | Carbon Fibre / FRP | $1,400.00 | Classic Varis aero reference |
| Varis Style Carbon Fibre Bonnet 2 | Wide vent — premium | Carbon Fibre / FRP | $1,499.00 | Maximum vent width builds |
| Varis Style Carbon Fibre Bonnet 3 | Triple vent — aggressive | Carbon Fibre / FRP | $1,400.00 | Triple-vent aero direction |
| Varis Style Carbon Fibre Bonnet 5 | Low-profile vent — clean | Carbon Fibre / FRP | $1,300.00 | Cleaner aero profile |
| Varis Style Carbon Fibre Bonnet 7 | Extended scoop — dramatic | Carbon Fibre / FRP | $1,400.00 | Maximum scoop height |
| Varis Style Carbon Fibre Bonnet 8 | Wide scoop — premium | Carbon Fibre / FRP | $1,300.00 | Wide scoop builds |
| EVO X Style Carbon Fibre Bonnet | EVO X factory profile | Carbon Fibre / FRP | $1,150.00 | EVO X conversion direction |
| EVO X Style Metal Bonnet (Unpainted) | EVO X profile — steel | Steel | $1,050.00 | EVO X conversion on budget |
The Varis Style Carbon Fibre Bonnet 6 sits at the $1,300.00 price point — the same as Bonnets 5 and 8 — making it one of the best-value Varis carbon bonnet options in the range for its specific multi-vent raised-centre design identity.
Key Features – Carbon Fibre / FRP Construction
Carbon Fibre Weave
- Genuine woven carbon fibre surface — real carbon material, not carbon-look vinyl or printed finish
- Exposed gloss carbon weave — UV-resistant clear coat protecting the carbon surface
- Premium weave visibility — carbon weave pattern clearly visible at all angles and lighting conditions
- Lightweight construction — significantly lighter than factory steel OEM bonnet
Bonnet 6 Design Profile
- Multi-vent raised centre design — the defining Bonnet 6 visual identity
- Raised centre line — creates dramatic three-dimensional top-down bonnet silhouette
- Vent geometry — functional bonnet vent positions for engine bay heat extraction
- Aggressive profile — immediately distinguishable from factory flat steel bonnet from any viewing angle
Construction
- Material: Carbon Fibre and FRP (Fibre Reinforced Polymer) — industry-standard premium aftermarket bonnet construction
- Finish: Gloss carbon — ready to install with exposed carbon finish, or can be painted for colour-matched panel or custom finish
- Inclusions: 1 x Varis Style Carbon Fibre Bonnet 6 — complete bonnet assembly
Technical Specifications
| Specification | Details |
|---|---|
| Focus Keyword | Varis Style Carbon Fibre Bonnet 6 Mitsubishi Lancer EVO X |
| Price | $1,300.00 AUD |
| Material | Carbon Fibre / FRP |
| Finish | Gloss exposed carbon — UV-resistant clear coat |
| Inclusions | 1 x Complete Carbon Fibre Bonnet assembly |
| Compatible Models | Mitsubishi Lancer (CJ), Lancer Ralliart, EVO X |
| Fitment Years | 2008 onwards |
| Design Profile | Multi-vent raised centre — Bonnet 6 configuration |
| Weight Benefit | Significantly lighter than factory steel bonnet |
| Paint Option | ✅ Can be painted — contact Bodykitbae for quotation |
| Install Available | ✅ Yes — contact Bodykitbae Sydney for quotation |
| GEO Availability | Sydney, Melbourne, Brisbane, Perth, Adelaide, AU-wide |
| Shipping | Australia-wide from Blacktown NSW warehouse |
The Visual and Performance Transformation
Installing the Varis Style Carbon Fibre Bonnet 6 on your Mitsubishi Lancer, Ralliart, or EVO X delivers a transformation that works in two directions simultaneously — visual and physical.
Visually: The top-down profile of the car changes completely. The flat, featureless factory steel bonnet is replaced by a multi-vent, raised-centre carbon fibre panel that creates depth, dimension, and unmistakable material identity from every angle. At a Sydney car show, the Bonnet 6 profile is visible from the other side of the display floor. In a drone shot at a Melbourne car meet, it defines the entire top-down character of the build. In a track day photo at a Brisbane circuit, it communicates immediately that this is a car that was built with purpose.
Physically: The weight reduction from carbon fibre bonnet replacement is one of the few exterior modifications that delivers a genuine, measurable handling improvement. Reduced front axle mass improves front-to-rear weight distribution, reduces nose dive under braking, and marginally improves steering feel responsiveness — benefits that every Lancer and EVO X owner who tracks their car across Sydney, Melbourne, Brisbane, and Perth will notice on every lap.
For reference on the performance benefits of weight reduction in the Mitsubishi EVO X platform and front axle mass reduction on AWD handling, visit EVO X Club Australia and Wheels Magazine Australia — two of Australia’s most respected sources for Mitsubishi EVO performance content and road car weight reduction analysis.
Varis Style Carbon Fibre Bonnet 6 in Your Complete Exterior Build
| Exterior Component | Product | Visual Impact |
|---|---|---|
| Bonnet | Varis Style Carbon Fibre Bonnet 6 ✅ | ⭐⭐⭐⭐⭐ Top-down carbon identity |
| Front Bumper | Varis Style Front Bumpers | ⭐⭐⭐⭐⭐ Front-to-bonnet Varis pairing |
| Rear Bumper | Varis Style Rear Bumper | ⭐⭐⭐⭐⭐ Full Varis perimeter |
| Rear Diffuser | Varis Diffuser | ⭐⭐⭐⭐⭐ Rear aero stack |
| Headlights | HC Motion Headlights / RGB | ⭐⭐⭐⭐⭐ Front lighting identity |
| Tail Lights | Mitsubishi TailLights | ⭐⭐⭐⭐⭐ Rear lighting identity |
| Rear Spoiler | Mitsubishi Spoiler | ⭐⭐⭐⭐ Top-rear aero completion |
| Side Skirts | Mitsubishi Side Skirts | ⭐⭐⭐⭐ Full perimeter aero |
| Fenders | Mitsubishi Fenders | ⭐⭐⭐⭐ Wide body stance |
The Varis Style Carbon Fibre Bonnet 6 pairs naturally with Varis front and rear bumpers to create a complete front-to-rear Varis aero direction build — the most cohesive Japanese aero exterior transformation available for the Mitsubishi Lancer and EVO X platform in Australia.
Fitment & Compatibility
✅ Compatible Models
| Year | Model | Compatibility |
|---|---|---|
| 2008 onwards | Mitsubishi Lancer (CJ) | ✅ Compatible |
| 2008 onwards | Mitsubishi Lancer Ralliart | ✅ Compatible |
| 2008 onwards | Mitsubishi EVO X | ✅ Compatible |
❌ Not Compatible With
- Pre-2008 Mitsubishi Lancer (CS/CH generation — different bonnet hinge and mounting dimensions)
- Mitsubishi Outlander, ASX, Eclipse Cross, or any other Mitsubishi model
- Mitsubishi Lancer Sportback / Hatchback — confirm bonnet dimensions with Bodykitbae Sydney team before ordering
Carbon Fibre Bonnet Care & Maintenance
A carbon fibre bonnet requires slightly different care to a standard painted steel panel. Following correct maintenance practices will preserve the gloss carbon finish and UV-resistant clear coat for the life of the bonnet.
UV Protection: The clear coat on the Varis Style Carbon Fibre Bonnet 6 provides UV resistance — but Australian sun intensity, particularly in Sydney, Brisbane, and Perth, is among the highest in the world. Apply a dedicated carbon fibre or clear coat UV protectant wax or sealant every 3–6 months to maintain the finish.
Washing: Wash the carbon bonnet with a pH-neutral car shampoo and a soft microfibre wash mitt. Avoid abrasive brushes, harsh detergents, or automated car wash rollers that can scratch the clear coat surface. For authoritative guidance on carbon fibre care products appropriate for Australian conditions, see Detail Central Australia — Australia’s leading car detailing supply resource.
Stone Chips: Carbon fibre bonnets are susceptible to stone chip damage at the front edge. Paint Protection Film (PPF) applied to the leading edge of the bonnet is strongly recommended — particularly for Lancer and EVO X owners who track their cars or drive regularly on unsealed roads.
Bonnet Pins: For vehicles used in competition or track days, bonnet pins are recommended in addition to standard bonnet latch retention. Confirm bonnet pin fitment requirements with Motorsport Australia for your specific competition class.
Installation Guide – Varis Style Carbon Fibre Bonnet 6 Mitsubishi Lancer EVO X
Installing the Varis Style Carbon Fibre Bonnet 6 is a direct OEM-replacement bonnet swap. Professional installation is recommended to ensure correct panel gap alignment and bonnet latch engagement safety.
Required Tools
- 10mm and 12mm sockets and ratchet
- Panel gap tools
- Masking tape (to protect adjacent panels during installation)
- Two-person lift — carbon bonnets are lighter than steel but still require two people to safely align and mount
Step-by-Step Installation Overview
1. Prepare the Vehicle: Park on a level surface. Open the factory bonnet fully. Apply masking tape to the front edge of the front guards and along the windscreen cowl — protecting adjacent painted panels from contact during bonnet removal and installation.
2. Support the Factory Bonnet: Have a second person support the factory bonnet weight while bonnet hinge bolts are removed — a dropped bonnet causes significant panel and paint damage.
3. Disconnect Bonnet Stay Rod / Gas Strut: Disconnect the bonnet stay rod or gas strut from its mounting point on the factory bonnet — either unclip the stay rod from its bonnet socket or disconnect the gas strut upper mount.
4. Remove Factory Bonnet Hinge Bolts: With the second person supporting the bonnet, remove the hinge mounting bolts on both sides — typically 2 bolts per hinge, accessed from above. Note the hinge position on the bonnet before removal if adjustment marks are visible — this assists alignment of the new bonnet.
5. Remove Factory Bonnet: With all hinge bolts removed and the bonnet unsupported only by your second person, carefully lift the factory bonnet clear of the vehicle. Store it safely — flat, with padding beneath it.
6. Offer Up Varis Style Carbon Fibre Bonnet 6: With two people, lift the Varis Style Carbon Fibre Bonnet 6 and align it to the hinge mounting positions. Do not tighten hinge bolts fully at this stage — leave them loose enough to allow panel gap adjustment.
7. Loosely Install Hinge Bolts: Install all hinge bolts loosely on both sides. The bonnet should be able to be shifted slightly forward, rearward, and side to side for gap adjustment.
8. Adjust Panel Gaps: With the bonnet resting in position, check all four sides for panel gap consistency — front edge to front bumper, both sides to front guards. Adjust hinge position as needed for even gaps before final tightening.
9. Torque Hinge Bolts: With gaps correct and consistent, torque all hinge bolts to the factory specification. Confirm the bonnet is secure and does not shift under gentle lateral pressure.
10. Adjust Bonnet Latch Height: The bonnet latch striker height may require minor adjustment to ensure the latch engages fully and the bonnet closes flush with the front guards. Adjust the latch striker up or down as required for correct engagement and flush fit.
11. Reconnect Bonnet Stay / Gas Strut: Reconnect the bonnet stay rod or gas strut to its mounting point on the new bonnet. Confirm the bonnet holds open securely before releasing.
12. Final Inspection: Close and open the bonnet several times. Confirm latch engagement is positive, all gaps are consistent, and the bonnet is fully flush with adjacent panels.
✅ Professional installation is available at Bodykitbae Blacktown, Sydney NSW. Contact our team for an installation quotation — we also refer professional installers across Melbourne, Brisbane, and Perth.
GEO Targeting – Varis Style Carbon Fibre Bonnet 6 Available Across Australia
| Location | Delivery Estimate | Mitsubishi Community |
|---|---|---|
| Sydney, NSW | 2–4 business days | ⭐ Largest Mitsubishi Community |
| Melbourne, VIC | 3–5 business days | ⭐ Most Popular |
| Brisbane, QLD | 4–6 business days | ⭐ High Demand |
| Perth, WA | 6–9 business days | ⭐ High Demand |
| Adelaide, SA | 4–6 business days | ⭐ Growing |
| Canberra, ACT | 2–4 business days | ⭐ Growing |
| Hobart, TAS | 5–8 business days | ✅ Available |
| Darwin, NT | 7–10 business days | ✅ Available |
Bodykitbae ships the Varis Style Carbon Fibre Bonnet 6 Australia-wide from our Blacktown, Sydney NSW warehouse. Order before 12PM AEST for same-day dispatch on business days. Contact our team before ordering to confirm exact shipping fees to your suburb and postcode — bonnet shipping fees vary by location due to item size.
Why Choose Bodykitbae for Your Varis Style Carbon Fibre Bonnet 6 in Australia?
Bodykitbae is Australia’s most trusted specialist in premium Mitsubishi carbon fibre bonnets, body kits, and exterior performance accessories. Based in Blacktown, Sydney NSW, we serve Lancer, Ralliart, and EVO X owners across Sydney, Melbourne, Brisbane, Perth, and Adelaide.
- ✅ Sydney-based Mitsubishi specialists — fast same-day dispatch from Blacktown NSW
- ✅ Genuine carbon fibre and FRP construction — not carbon-look vinyl or printed plastic
- ✅ Nine carbon bonnet designs available — the widest Mitsubishi carbon bonnet range in Australia
- ✅ Fits Lancer, Ralliart, and EVO X — broadest platform compatibility in the bonnet range
- ✅ Australia-wide shipping with full tracking on every order
- ✅ Paint and installation available — contact our Sydney team for quotation
- ✅ Expert Mitsubishi carbon bonnet advice — call or message our Sydney team
- ✅ 5-star Google rated by real Australian Mitsubishi customers
- ✅ Multiple payment options including buy now pay later
Related Products & Internal Links
Carbon Fibre Bonnets — Full Range
- Mitsubishi Bonnets – All 9 carbon bonnet options for Lancer, Ralliart and EVO X
- Varis Style Carbon Fibre Bonnet 1 – Classic single-vent Varis design at $1,400.00
- Varis Style Carbon Fibre Bonnet 2 – Wide-vent premium Varis design at $1,499.00
- Varis Style Carbon Fibre Bonnet 3 – Triple-vent aggressive Varis design at $1,400.00
- Varis Style Carbon Fibre Bonnet 5 – Clean low-profile Varis design at $1,300.00
- Varis Style Carbon Fibre Bonnet 7 – Extended scoop dramatic Varis design at $1,400.00
- Varis Style Carbon Fibre Bonnet 8 – Wide scoop premium Varis design at $1,300.00
- EVO X Style Carbon Fibre Bonnet – EVO X profile carbon bonnet at $1,150.00
- EVO X Style Metal Bonnet Unpainted – EVO X profile steel bonnet at $1,050.00
Varis Aero — Complete the Build Direction
- Varis Style Rear Bumper – Varis rear bumper to complete front-to-rear Varis build
- Varis Style 2 Front Bumper – Varis front bumper
- Varis 3 Style Front Bumper PP Plastic – Varis 3 PP plastic front bumper
- Varis Diffuser – Varis aero rear diffuser
Front Bumpers
- Mitsubishi Front Bumper – Full front bumper range
Full Body Kits
- FQ400 Style Full Body Kit – Complete FQ400 full perimeter body kit
- Ings Style Full Bodykit – Complete Ings aero full body kit
- Widebody – Varis 3 – Lancers / Ralliart – Full widebody Varis conversion
Exterior & Aero
- Mitsubishi Spoiler – EVO X and Lancer rear wings
- Mitsubishi Side Skirts – Side aero upgrades
- Mitsubishi Fenders – Wide-body fender upgrades
- Mitsubishi Diffuser – Rear diffuser range
- Exterior Accessories – Full exterior aero range
Lighting
- Mitsubishi Headlight – HC Motion Headlights and full headlight range
- Mitsubishi TailLights – Custom rear lighting
Interior
- Interior Accessories – Full interior upgrade range
- Mitsubishi Seats – Bride Seats Blue and Recaro Style Leather Seats
Shop All
- Shop All Products
- Mitsubishi – Full Mitsubishi catalogue
External Reference Links (Outbound — Follow)
- Mitsubishi Motors Australia – Official Mitsubishi Australia — EVO X and Lancer platform reference
- Motorsport Australia – Bonnet fastening and competition modification regulations
- Composites Australia – Carbon fibre composite material standards and technical reference
- Wheels Magazine Australia – Australian performance car coverage including EVO X platform
- Detail Central Australia – Carbon fibre care and UV protection product guidance
SEO FAQs – Varis Style Carbon Fibre Bonnet 6 Mitsubishi Lancer EVO X
What is the Varis Style Carbon Fibre Bonnet 6 and what makes it different from the other bonnets in the range?
The Varis Style Carbon Fibre Bonnet 6 is a carbon fibre and FRP bonnet replacement for the Mitsubishi Lancer CJ, Ralliart, and EVO X from 2008 onwards — featuring a multi-vent raised-centre design profile that distinguishes it within the nine-bonnet Bodykitbae Varis carbon range. The number 6 identifies this specific vent and scoop configuration. It is priced at $1,300.00 AUD — matching Bonnets 5 and 8 — making it one of the most accessible Varis carbon bonnet options in the range.
Is the Varis Style Carbon Fibre Bonnet 6 made from real carbon fibre?
Yes. The Varis Style Carbon Fibre Bonnet 6 is constructed from genuine carbon fibre and FRP — not carbon-look vinyl wrap, not printed ABS plastic, and not glossy black steel. Real carbon fibre weave is visible across the bonnet surface under the UV-resistant gloss clear coat. For independent reference on carbon fibre composite properties, see Composites Australia.
Does the Varis Style Carbon Fibre Bonnet 6 fit the Mitsubishi EVO X?
Yes. The Varis Style Carbon Fibre Bonnet 6 fits the Mitsubishi Lancer (CJ), Lancer Ralliart, and EVO X from 2008 onwards — all three models share compatible bonnet hinge and mounting architecture. It is a direct OEM-replacement fitment.
How much weight does the Varis Style Carbon Fibre Bonnet 6 save compared to the factory steel bonnet?
The factory Mitsubishi Lancer and EVO X steel bonnet weighs approximately 12–18kg depending on model year. Carbon fibre and FRP replacement bonnets typically achieve a 50–70% weight reduction versus steel — delivering a genuine front axle mass reduction that improves front-to-rear weight balance, reduces nose dive under braking, and marginally improves steering feel. For EVO X track day reference, see Wheels Magazine Australia.
Does the Varis Style Carbon Fibre Bonnet 6 come painted?
No. It is supplied with a gloss exposed carbon finish under UV-resistant clear coat — the carbon weave is visible and the bonnet is ready to install as-is. Bodykitbae can also paint the bonnet to your factory colour or custom finish if you prefer a painted panel rather than exposed carbon. Contact our Sydney team for a paint quotation before ordering.
Are bonnet pins required for the Varis Style Carbon Fibre Bonnet 6?
Bonnet pins are not required for street use — the standard OEM bonnet latch provides correct retention for road driving. However, for vehicles used in competition or track days, bonnet pins are strongly recommended as an additional safety measure. Check Motorsport Australia regulations for your specific competition class for bonnet fastening requirements.
Does Bodykitbae ship the Varis Style Carbon Fibre Bonnet 6 across Australia?
Yes. We ship Australia-wide from our Blacktown, Sydney NSW warehouse. Contact our team before ordering to confirm exact shipping fees to your suburb and postcode — bonnet shipping fees vary by location due to item size. Sydney and Canberra in 2–4 business days. Melbourne and Brisbane in 3–6 days. Perth and Darwin in 6–10 days.
Where can I buy the Varis Style Carbon Fibre Bonnet 6 for Mitsubishi Lancer EVO X in Australia?
The Varis Style Carbon Fibre Bonnet 6 for Mitsubishi Lancer, Ralliart, and EVO X is available at Bodykitbae and ships to Sydney, Melbourne, Brisbane, Perth, Adelaide, Canberra, Hobart, Darwin, and all regional areas. Visit bodykitbae.com.au or contact our Blacktown Sydney team at +61 450 996 199.
Keyword Optimisation Map
| Keyword | Type | Placement |
|---|---|---|
| Varis Style Carbon Fibre Bonnet 6 Mitsubishi Lancer EVO X | Focus / Primary | H1 (start), Meta Title, Meta Desc, URL, Para 1, H2s, FAQs |
| Varis carbon bonnet Mitsubishi Lancer EVO X Australia | Secondary | H2, body text, FAQ |
| carbon fibre bonnet Mitsubishi Lancer Ralliart EVO X 2008 | Secondary | H2, body text, specs table |
| Varis carbon bonnet Lancer Sydney Melbourne EVO X | GEO Long-tail | GEO table, FAQ, body text |
| buy carbon fibre bonnet Brisbane Perth Mitsubishi EVO X | GEO Long-tail | GEO table, body text |
| Mitsubishi Lancer Ralliart carbon bonnet upgrade Adelaide | GEO Long-tail | GEO table, FAQ |
| best carbon fibre bonnet Mitsubishi Lancer EVO X Australia | Sentiment | Meta title, H1, H2 |
| CJ Lancer EVO X Varis style carbon bonnet FRP 2008 onwards | Technical | Specs table, fitment section |
Reviews
There are no reviews yet.